Adopt integrated design, with ittle space, but neat and beautiful. The through- type structure design, with low wind resistance and smooth exhaust. The temperature in the air duct is consistent with that in the chamber, effectively avoid oil drop, and equipped with insulation layer, little thermal radiation to the workshop. The air duct can be disassembled independently, and the cleaning and maintenance is convenient.
◆The heat recovery system is high heat efficiency, and saves about 20%- :30% energy after fresh air enter into the chamber via this heat recovery system.
◆The heated fresh air prevents oil drpping due to the big temperature difference in the chamber.
◆The design of exhaust duct is energy saving, improves the fabric feelings and keep the chamber humidity at the best state.
◆Saces energy and improve efficiency about 2%- 3%(depending on the production)
◆Both exhaust fan and supplement fan are variable-frequency control
◆Box design occupies Ittle space
◆Integrated heat exchanger can be dismantled for dleaning and maintainance.
◆Reduce the thermal radiation and the ambient temperature in the workshop.
◆Roller chain which funs on maintenance-free Orbit with ully encapsulated bearings and long-lile lubrication for years
◆Minimum lubricant consumption by the direct lubrication system
◆Pin chain ,clip chain
◆Optionally depinning protection: locking clamp or protection bar
Width Adjustment Device
◆With the main instument operating desk, single or combinable movement controls each section adjustment device,setting requirements of any width
◆With the tall operating desk, single movement controls the final section width/ combinable movement controls the whole machine width
◆The insulation panel of the whole machine is made of 150 thick high density heat insulating material, it keeps the heat loss at the lowest state.
◆Careful sealing of all connection positions
◆The total height of the chamber is 1600mm, special disign for energy saving,lowest heat loss and meet all process requirements.
◆Air locks at the fabric entry and exit openings
Independent Drive Of Main Chain
◆By control module, it is equpped as good quality frequency controlled-3-phase AC motors for absolutely synchronised operation
◆Derect frequency drive system to guantee the lowest amount of mantance and energy
◆Independent drive design, space saving, and heat dissipation
Email: email@example.com firstname.lastname@example.org
Address: No. 1006-1012, Jinghai Avenue, Binhai Industrial Zone, Shaoxing City
2. Changshu Office
Address: Building 1, Zhongjiang Kaiyue Apartment, No. 1 Huiwen Road, Changshu City, Jiangsu
3. Foshan Office
Address: 1201-1205, Building 20, Liya Court, No. 71, Nanhai Avenue, Foshan City
4. East Guangdong Office
Address: 100 meters north of Xihu Gas Station, Zhanlong Town, Puning City
Contact:Vinodh & panneer
Phone: 91 99947 87562 & +91 9843066779
Address:2/121,Seventham palayam,Muthunam palayam post, Tirupur-641606.INDIA.
PRIMATEK INNOVATION Ltd.
Mobile: +852 61453245/ +62 858 851 727 80
Guangzhou Tiangong Kaiwu Technology Co., Ltd.
Address: Room 307, No.167, Huajing Road, Tianhe District, Guangzhou
Fu du enterprise co., ltd.
Address: NO.15B, Jalan Maju Barat, Taman Maju, 83000 Batu Pahat, Johor, Malaysia